Dodge Journey: Frame and Bumpers
Dodge Journey Service & Repair Manual / Accessories and Equipment / Frame and Bumpers
Removal, Installation
REMOVAL Fig. 48: Lower Instrument Panel Knee Blocker 1. Disconnect and isolate the battery negative cable. 2. Remove the lower instrument panel knee blocker. 3. Remove upper steering colu ...Bumpers
...See also:
Crossmember, front fore and aft
REMOVAL
1. Raise and support the vehicle.
2. If equipped, remove the engine belly pan.
Fig. 29: Removing/Installing Fore/Aft Crossmember
3. Remove the front engine mount thru-bolt (2).
Fig ...
Engine oil leak inspection
Begin with a thorough visual inspection of the engine, particularly at the
area of the suspected leak. If an oil
leak source is not readily identifiable, the following steps should be followed:
1. ...
Connector, data link
DESCRIPTION
Fig. 1: Data Link Connector
The Data Link Connector (DLC) (2) is a 16-way molded plastic connector
insulator on a dedicated take out of
the instrument panel wire harness. This conne ...