Dodge Journey: Electronic Control Modules
Dodge Journey Service & Repair Manual / Accessories and Equipment / Electronic Control Modules
- Standard procedure
- Communication
- Connector, data link
- Module, anti-lock brake system
- Module, engine control
- Module, final drive control
- Module, heated seat
- Module, powertrain control
- Module, steering column
- Receiver, wireless ignition node
Switch, remote radio
DESCRIPTION
Remote radio control switches are rocker-type switch units are mounted in the
upper spoke covers of the rear
(instrument panel side) steering wheel trim cover. The switch unit on the l ...
Standard procedure
MODULE/PROGRAMMING ORDER REPLACEMENT GUIDE
MODULE PROGRAMMING
The Wireless Ignition Node (WIN) controls the Vehicle Theft Security System (VTSS),
Remote Keyless Entry
(RKE). When a Powertrain ...
See also:
Installation
1. Completely retract the caliper piston back into the bore of the caliper.
Use a C-clamp to retract the piston.
Place a wood block over the piston before installing the C-clamp to avoid
damagi ...
Standard procedure
SPIRAL CELL BATTERY CHARGING
WARNING: Never exceed 14.4 volts when charging a spiral cell
battery. Personal
injury and/or battery damage may result.
Vehicles equipped with a diese ...
Air cleaner
REMOVAL
Fig. 85: Air Filter Housing Clips
1. Disengage the air filter housing clips (1).
2. Slide the air filter housing cover (2) forward slightly to disengage tabs
from the bottom of the ai ...
