Dodge Journey: Plumbing, front
Dodge Journey Service & Repair Manual / Heating & Air Conditioning / Plumbing, front
- Description, Operation
- Warning, Caution
- Diagnosis and Testing
- Standard procedure
- Compressor, A/C
- Condenser, A/C
- Core, heater, front
- Core, service port valve
- Drier, A/C receiver
- Evaporator, A/C, front
- Line, A/C discharge
- Line, A/C liquid
- Line, A/C suction
- Oil, refrigerant
- Refrigerant
- Valve, A/C expansion
Motor, blower, rear
DESCRIPTION
Fig. 191: Rear Blower
The rear blower motor (1) is a 12-volt, direct current (DC) motor mounted
within a plastic housing with an
integral wire connector (4) and a squirrel cage-type ...
Description, Operation
DESCRIPTION
The A/C refrigerant lines and hoses are used to carry the refrigerant between
the various A/C system
components. The refrigerant lines and hoses for the R-134a A/C system consist of
...
See also:
Pulley, idler
Removal
2.4L ENGINE
Fig. 30: ACCESSORY DRIVE BELT IDLER PULLEY - 2.4L
- UPPER PULLEY
- LOWER PULLEY
1. Remove accessory drive belt.
2. Remove upper idler pulley (1) and bolt.
3. Re ...
Description, Operation
DESCRIPTION
Fig. 272: Rear Heater Core Description
The rear heater core (1) is located in the rear heater-A/C housing behind the
right interior quarter trim panel.
The rear heater core is a h ...
RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)
TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat Towing With All Four
Wheels On The Ground)
Recreational towing for this vehicle is not recommended.
NOTE: If the vehicle requires towing, make sure ...