Seal, crankshaft oil, rear

Removal Fig. 214: REAR MAIN SEAL-INSTALLED The crankshaft rear oil seal is incorporated in the seal adapter (2) and can not be removed from the adapter. The crankshaft rear oil seal/seal adapte ...

Adjustments

ADJUSTMENT The right and left support assemblies are slotted to allow for right/left drive train adjustment in relation to drive shaft assembly length. Check and reposition right and left engin ...

See also:

Removal
Fig. 2: Engine Cover Remove the engine cover. 1. Disconnect battery negative cable. 2. Remove air inlet tube (2) and air cleaner assembly (4). Fig. 3: Bleeder At Slave Cylinder 3. Remove ...

Removal
1. Remove the engine cover. 2. Release fuel pressure. 3. Disconnect negative battery cable. 4. Drain cooling system. 5. Evacuate the A/C system using a suitable refrigerant recovery machi ...

Description, Operation
DESCRIPTION The charging system consists of: Generator Decoupler Pulley (2.4L and Diesel Only) Electronic Voltage Regulator (EVR) circuitry within the Powertrain Control Module (PCM) Ign ...