Connector, data link

DESCRIPTION Fig. 1: Data Link Connector The Data Link Connector (DLC) (2) is a 16-way molded plastic connector insulator on a dedicated take out of the instrument panel wire harness. This conne ...

Description, Operation

DESCRIPTION Fig. 2: Antilock Brake Module - ANTILOCK BRAKE MODULE (ABM) - HYDRAULIC CONTROL UNIT (HCU) - PUMP/MOTOR The Antilock Brake Module (ABM) is a microprocessor-based device which ...

See also:

Seal, axle drive shaft
REMOVAL Fig. 197: Axle Shaft Seal Removal 1. Remove axle shaft. 2. Insert a flat-blade pry tool (2) at outer edge of axle shaft seal (1). 3. Tap on the pry tool (2) with a small hammer and ...

Installation
CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Removal
2.4L Fig. 3: Capacitor 2.4L - Bolt - Capacitor - Connector 1. Disconnect and isolate negative battery cable at battery. 2. Remove engine cover. 3. Remove electrical connector (3). ...