Installation

CLUTCH - FIXED DISPLACEMENT A/C COMPRESSOR NOTE: Typical A/C compressor and clutch assembly shown in illustrations. Fig. 214: Clutch Coil & Snap Ring 1. Align the dowel pin on the bac ...

Description, Operation

DESCRIPTION Fig. 221: Condenser Description NOTE: A/C condenser with automatic transmission cooler shown. A/C Condenser without cooler similar. The A/C condenser (1) is located in the f ...

See also:

Ring(s), piston
Standard Procedure PISTON RING FITTING Fig. 200: CHECK GAP ON PISTON RINGS - FEELER GAUGE 1. Wipe cylinder bore clean. Insert ring and push down with piston to ensure it is square in bore ...

Installation
CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant oil level will prevent the A/C system fro ...

Removal
WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow these instructions may result in serious or fat ...